this post was submitted on 15 Jun 2026
19 points (95.2% liked)

Asklemmy

54585 readers
641 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 7 years ago
MODERATORS
 

There are kits like this sold online, the one linked, specifically type 4 with a drawer, work as follows.

  1. Put about 1-2 cm of water in, optional an icepack.
  2. Run your dryer.
  3. At the end of the cycle, dump the collected condensed water, optionally swapping the ice pack.

Do these work well enough to dehumidify dryer output in a rental environment?

Edit 1: For those recommending me to buy a ventless / condenser / heat pump dryer.

Feel free to send me $50-100 each, as I cannot afford one.

Do note, I do have a vent near where my dryer is, it is just very loud. Thus why I was thinking of supplementing it with this.

you are viewing a single comment's thread
view the rest of the comments
[–] zigmus64@lemmy.world 6 points 15 hours ago

I have zero experience with these things (never even heard of them), but if you’re talking about some sort of passive system designed to condense water vapor out of conventional dryer exhaust, there’s no way something relying on an ice pack is going to make a meaningful dent in the water content of that air.

Dryer vent air can be about 120F at ~20% relative humidity (per a Google search). Looking at the psychrometric chart on engineeringtoolbox.com, if you were to cool that air down to 70F, it would be at 100% relative humidity (otherwise known as the dew point), meaning you wouldn’t have removed any moisture from the air…

Practically speaking, you’d basically just be massively increasing the humidity in your space… eventually it would likely condense on any surfaces in your home and increase the likelihood of mold growth.