this post was submitted on 07 Jan 2026
29 points (93.9% liked)
Selfhosted
60210 readers
962 users here now
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
-
Be civil.
-
No spam.
-
Posts are to be related to self-hosting.
-
Don't duplicate the full text of your blog or readme if you're providing a link.
-
Submission headline should match the article title.
-
No trolling.
-
Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details.
Resources:
- selfh.st Newsletter and index of selfhosted software and apps
- awesome-selfhosted software
- awesome-sysadmin resources
- Self-Hosted Podcast from Jupiter Broadcasting
Any issues on the community? Report it using the report flag.
Questions? DM the mods!
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I use a similar Dell Optiplex 7000 series.
It boots from the NVME, with an 8TB 3.5 disc for data, and a 500GB SD for my VMs. (Since spinning disks can idle much lower than SSD, getting my always-on VMs off the big drive lets it idle, with the SSD peak power being lower than the peak of spinning disk Adding the SSD increased net power slightly).
I use a splitter on the 12v power line for both of the drives. It's fine.
This box only has an 80w power supply, and with both those drives hooked up it draws 20w at idle, and peaks at 70w when converting multiple videos simultaneously.
The manuall tells you what you can do without voiding the warranty.
Edit: Given it's age, I'd pull the CPU cooler and replace the paste. It's likely hardened by now. Mine was randomly rebooting because the cpu would overheat. Replaced the thermal paste and its been rock solid since.