this post was submitted on 21 Apr 2026
2 points (100.0% liked)

homeassistant

19447 readers
25 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
2
Feedback regarding Ecolink Fire Alarm Audio Detector (www.zwaveproducts.com)
submitted 3 weeks ago by Lem453@lemmy.ca to c/homeassistant@lemmy.world
2 comments fedilink hide all child comments
 

Does anyone have feedback on how well these work?

I have fire alarms on different floors of the house and I'm wondering if this device will be able to listen for the alarm from another floor. The alarm is still quite loud throughout the house but the instructions say it needs to be right next to an existing alarm.

I'd rather not have to buy a bunch of these if possible.

you are viewing a single comment's thread
view the rest of the comments
[–] ari_verse@lemmy.ca 1 points 2 weeks ago

+1 @Decipher0771@lemmy.ca

I used the ecolink device for some years until I discovered the Zen55, which I implemented a few weeks ago. The ecolink stopped detecting CO after I changed my interconnected alarm system to a new Kidde model as the old one started to give occasional false alarms. The ecolink was also unable to clear the CO Alarm once triggered with the old Kidde model I was using, it required removing and reading the device from the zwave network.

Zen55 worked perfectly, able to differentiate CO and smoke signals and auto-clears when the alarm condition stops. It requires no batteries.