homeassistant

20115 readers

16 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

[Solved] How to detect the position of a dumb wall switch? (sh.itjust.works)

submitted 5 days ago* (last edited 5 days ago) by clay_pidgin@sh.itjust.works to c/homeassistant@lemmy.world

43 comments fedilink hide all child comments

My nightstand lights are connected to a surge protector plugged into a Zigbee smart plug plugged into a dumb wall outlet controlled by a single dumb wall switch.

I have the smart plug set to default=On, so the wall switch works fine, and I can also turn the lights off from my phone or via an automation. All good so far.

What I WANT is to be able to turn the lights ON without getting out of bed, and irrespective of the position of the switch.

I tried putting a second smart plug in the switch-controlled outlet and making an automation to toggle the surge protector's smart plug when the switch's empty smart plug powers off/on via the wall switch, but it looks like it's not simple to detect a Zigbee device "disappearing". I found some integrations that detect zigbee devices disappearing, but those seemed more for running health checks to detect and repair moved devices than for live detection.

Any suggestions?

Edit:

Looks like a relay behind the switch will be my best bet. Thank you all!

you are viewing a single comment's thread
view the rest of the comments

[–] clay_pidgin@sh.itjust.works 1 points 4 days ago

Theory is all I have! I'm too new at this. That's part of what makes it fun!

Yeah, it sounds like I want a relay behind the switch.