I want to swap the side panel with an aclyics sheet. But it doing so will leave a ugly silver dempt on the top and bottom side of the pc, since the original side pane wraps around to hold itself in place. Is there a way to patch it up?
this post was submitted on 26 Jul 2025
28 points (100.0% liked)
Ask Lemmy
41499 readers
1428 users here now
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, toxicity and dog-whistling are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !uspolitics@lemmy.world
7) No Hit-and-Run questions.
Please don't delete your post for no apparent reason. If you plan on deleting a question later, say so in the post, or if you feel that you have a good reason to remove it, message a mod beforehand. It's not fair to the ones who took their time to answer, and it's not in the spirit of the community.
8) No Bots.
Posts or comments from bots, LLM's, AIs, Neural Networks, Transformers, or Marvin the Paranoid Android are not welcome in AskLemmy. Real humans only please.
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
cut the center out of the old panel and insert a plexi panel
That is actually very smart. Should I be making the acrylics panel a few mm bigger than the hold than pressing it into the hole I cut?
Yes. I recommend gluing the acrylic to the inside of the steel panel. It's hard to drill holes (for tiny brass bolts) that close to the edge without cracking.
Although, I suppose you could melt the holes. Carefully. Or glue magnets. Nothing in a PC these days that a magnet can hurt.
I bought a dremel and about to start cutting soon. Should I make the corner of the hole rounded or straight right angle? And how big should the hole be?
I added a rgb strip on the very bottom, the ram lights up and the fan is rgb too. Also I am planning to attach a t-force delta rgb ssd on top of the CD from or replace the CD rom if I run out of heights