Natal

I had GPSD working nicely, confirmed both by cgps -s and mongps, but I was stuck on geoclue. Whatever I did, the GPS wouldn't send data to Organic Maps. I kept having this error: "Error: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: Object does not exist at path “/org/freedesktop/GeoClue2/Client/1”" despite being 100% sure client1 was the right one.

Going to Lineage OS was much easier for me and I just needed a working GPS. Linux GPS will stay in the "challenge todo list", because I'd like to figure it out eventually. I most likely was doing something stupid.

He, I wish. I don't have access to a 3D printer either at home or in the close area. I'd have to go to the closest big city for that and at that point it costs as much in fuel as it'd cost to get a new one. Granted I have to find one that suits my needs to begin with.

What car do you have? Dacia Sandero Stepway

Didn’t you want to use it for your music as well with navidrome? Maybe, if the USB port works, then I'll use Navidrome on it and put the music that way through the car speaker. If they don't, I can plug my phone to the car speakers and the Pi to bluetooth external speakers. The phone only crashes during satnav. By the way I did a recovery reset, i'll try a drive today and see how it goes.

CoMaps may be up your alley, uses OSM. Thanks for the name, current app in testing is OsmAnd, as i've seen it recommended a lot. If it doesn't work I'll try CoMaps.

Especially since I just bought the car a few weeks before. I feel you, this phone was bought specifically for car use. My former one was slow, but I don't use my phone much so there was no point in upgrading. I got the Oppo A51 back then because it had decent reviews for the price and I had a deal on it. But I think it's not beefy enough. It thermal throttles very easily, too.

I didn't know about osmin! I might try it out.

For the poweroff, I'll just poweroff the Pi from the UI and wait a sec for it to go down. Initial testing has me waiting 10 seconds on the "shutting down" screen. That's short enough, meanwhile I can put my jacket on or something. Once off, I just unplug it. It's also running on SSD because I don't trust SD cards to endure constant read/write from satnav so I installed from SD card and cloned the OS to an SSD, it should be more resilient this way.

For the audio, I'll first try the obvious and plug the Pi to the USB A of the factory car unit. Maybe it'll detect it as mass storage media and give it access to the built in audio system. Else, I'll just use a bluetooth speaker I have at home. I don't need good audio for "turn left/turn right", just to hear it.

The whole project is an attempt at getting rid of Android Auto and having my own standalone unit that will free me from unwanted updates both from the OS and the apps. I've had Waze become useless three times in the span of two years because they pushed updates that made the app unstable enough to not be reliable.

For the viewing angle, on the car next to the existing head unit screen, there's a mounting bracket. I'll use that to mount a 7inch display I got. It'll sit right above the existing one if that doesn't obstruct the view too much, else I'll have to get one of those arms with joints and lower it somewhere not annoying.

My bluetooth speaker is the perfect size to sit in the cup holder so if the car audio isn't possible, then there's a plan B.

I'll try the recovery mode for my phone and see if that helps!

Hey, thanks for the link. I haven't looked at that type of parts because I'm not confident tinkering with the car, especially since it's still fairly new and I'm too afraid to damage some plastic. And I also don'"t have any spare room available on the dashboard anywhere.

There's a little nook to empty your pocket between the gear shifter (manual car) and the dashboard but it's wide open, fairly hot, and probably still too small even to fit a raspberry pi in a case with the cooling I'll need.

That's why I've been looking at external solutions. If wires weren't an issue, I'd put a trunk/boot organizer at the back and store the pi unit there during drives but it's not practical with the wiring. Still routing cables in my head in case I'd get an idea.

Here's a photo I found of the front of the car: https://www.ouestfrance-auto.com/sites/default/files/sandero_stepway_1_0.jpg

Yeah that might end up being necessary, I haven't found any easy solution to provide the 5A/5V required by a Pi5. Still pondering the power supply issue.

Thanks! I've studied this option and Pi5 needs 5A/5V. I haven't found something adequate yet for that power requirement. So I'm actually considering going for a Pi4 instead.

That's the obvious route, indeed. But it's not a fun one, I don't get to own the data and the device is subject to poor updates which will render it useless in a few years. I'd rather buy an old GPS than buy a new phone honestly. The phone that is currently the culprit cost me 230, 23 months ago. It still works perfectly fine outside of the car for everything I need it for, it just doesn't like being used in car. It's too much for it I guess, though it wasn't too much two years ago.

I considered a tablet, but I'm not sure if there's a serious advantage over a phone at that point.

I didn't take it as throwing shade :) I just thought I'd provide more context, though reading it back now it looks more like a rant.

Another person here pointed me to the Crankshaft too. It looks cool but it still uses a phone. I'll try to erase this silicon slab from the equation entirely. From my personal experience over the years, phones have become a hindrance more than a supportive gadget.

I think i'll go ahead and give it a try. I just need to figure out a way to cool the device properly in a hot environment.

Yeah, possibly, I might be a contrarian but I'm tired of cloud services, subscriptions, big corporations. I'm also tired of multipurpose devices that do plenty of things poorly. I just want a screen that shows me how to get somewhere, reliably. My phone from two years ago simply stopped being recognized by the car, bought a new one for that single purpose, and this fella already crashes too.

I didn't go crazy on the budget but it worked initially and now it doesn't at all so I'm tired of this bad tech. If I build my own, my hope is that I can make it more resilient and easier to repair/fix.

Almost, from my understanding of that page, you still need to plug a phone to mirror Auto. I want to remove the phone entirely from the equation, with local offline computing.