Steam Hardware

22048 readers

632 users here now

A place to discuss and support all Steam Hardware, including Steam Deck, Steam Machine, Steam Frame, and SteamOS in general.

As Lemmy doesn't have flairs yet, you can use these prefixes to indicate what type of post you have made, eg:
[Flair] My post title

The following is a list of suggested flairs:
[Deck] - Steam Deck related.
[Controller] - Steam Controller related.
[Machine] - Steam Machine related.
[Frame] - Steam Frame related.
[Discussion] - General discussion.
[Help] - A request for help or support.
[News] - News about the deck.
[PSA] - Sharing important information.
[Game] - News / info about a game on the deck.
[Update] - An update to a previous post.
[Meta] - Discussion about this community.

If your post is only relevant to one hardware device (Deck/Machine/Frame/etc) please specify which one as part of the title or by using a device flair.

These are not enforced, but they are encouraged.

Rules:

Follow the rules of Sopuli
Posts must be related to Steam Hardware or Steam OS in an obvious way.
No piracy, there are other communities for that.
Discussion of emulators are allowed, but no discussion on how to illegally acquire ROMs.
This is a place of civil discussion, no trolling.
Have fun.

Link to our Matrix Space

founded 4 years ago

MODERATORS

Fubarberry@sopuli.xyz

Moxvallix@sopuli.xyz

[Controller] Bricked by failed firmware update, FIXED (lemmy.world)

submitted 2 hours ago* (last edited 2 hours ago) by rtxn@lemmy.world to c/steamdeck@sopuli.xyz

8 comments fedilink hide all child comments

The controller is un-bricked! All thanks to this user: https://redlib.catsarch.com/r/SteamController/comments/1tc3ua9/arrived_today_wont_connect_update_failed_bricked/

Symptoms:

The firmware update failed.
Turning on the controller causes the LED to flash red.
The device takes charge from both the Puck and USB.
Can't connect wirelessly to the Puck.
When connected using a USB cable, the device shows up as "Valve Software Steam Controller Bootloader" in lsusb's output.

How to fix:

Start Steam in developer mode by using the -dev argument.
Open Settings -> Developer
Under Hardware Updates, press the Update all devices now button.

Steam will go through the usual firmware update steps and flashes all connected devices. This failed for me one more time, then worked fine once I switched to a proper USB C-to-C cable.

You might need to flash the Puck too, then pair it with the controller.

Original post:

The controller worked fine until I started Steam. It showed the firmware update popup, I did as instructed, the puck was updated fine, but the controller failed. Now the LED flashes red when I turn it on, it doesn't react to button inputs, doesn't connect wirelessly, isn't recognised as a controller when connected through USB, and shows up only as "Valve Software Steam Controller Bootloader".

I think it's reasonable to assume that the firmware is cooked. Naturally I'm opening a support ticket with Valve, but I'm wondering if anyone has any idea on how to resolve it without waiting, potentially for months, for a replacement.

you are viewing a single comment's thread
view the rest of the comments

[–] Fubarberry@sopuli.xyz 1 points 1 hour ago

Thanks for the update! That's really good to know.