3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I used to be able to print things. Now for the past 6 months or so I've wasted spools upon spools trying to print anything and this always happens. I'm just about ready to sell this machine and give up on the whole thing.
Is there anything glaringly obvious that springs to any of your expert minds?
Heat up the bed and then do the manual paper level. Check the levelness of the gantry. Then do a automatic bed leveling. Looks like you are using Crealitys shitty build surface that is known to delaminate and bubble with heat. While its warm press around the plate and see of it has bubble spots because if it does then when it auto levels it will be dips and high places. You may want to replace the build surface with a spring steel or glass.