this post was submitted on 12 Nov 2026
180 points (99.5% liked)

Linux

68858 readers
706 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 7 years ago
MODERATORS
 

Libreboot, the free and open-source boot firmware project that replaces proprietary BIOS and UEFI firmware on supported hardware, has released version 26.11, transitioning to full UEFI support through the MrChromebox EDK2 payload, which also makes it compatible with Microsoft Windows.

With this release, nearly all supported boards now ship exclusively with EDK2 firmware. The project removed GRUB as a coreboot payload, along with the previously included MemTest86plus and CSMWrap payloads, simplifying firmware configuration and reducing maintenance.

However, this change comes with an important warning for existing users. Systems configured to boot in legacy BIOS mode must be migrated to UEFI, including setting up a proper EFI System Partition, before installing the new firmware. Otherwise, existing operating system installations may no longer boot.

Legacy booting is still possible, but users must add the required components themselves when compiling Libreboot. The build system now supports inserting GRUB EFI, MemTest86plus, and ReBIOS through its efi/ directory.

On the hardware side, Libreboot 26.11 enables TPM 2.0 by default on several systems, including the ThinkPad X270, X280, T480, T480s, and T580, along with the Supermicro X11SSH-F and Topton X2E N150. TPM support was previously disabled due to problems with SeaBIOS, which no longer occur with EDK2.

Dell Latitude laptops also receive fixes for fan control, battery status reporting, and lid-switch handling during suspend. These improvements use an updated ACPI implementation replacing older SMM-based patches. Furthermore, SD card reader functionality has been restored on the ThinkPad W541 and Dell Latitude E7240 through an EDK2 patch.

For Chromebook users, the release restores configurations matching upstream MrChromebox after changes in Libreboot 26.10 caused boot failures on some systems. The Dell OptiPlex 780 also switches to EDK2, while the OptiPlex 5050 SFF gains SATA hotplug support and a fix for PCIe error reporting related to certain wireless cards.

A security-related EDK2 fix addresses an ICMP packet bounds-checking vulnerability in its PXE implementation. According to the developers, Libreboot was not affected because its configurations use iPXE instead, but the patch has been incorporated into the distributed source code.

Finally, the release simplifies several aspects of Libreboot’s build system, including firmware payload configuration, source handling, and ROM naming. Custom firmware images now use clearer BIOS and UEFI prefixes. Improvements to the lbmk build utility make it easier to insert additional EFI payloads and work with older firmware images.

For more information, see the release announcement.

you are viewing a single comment's thread
view the rest of the comments
[–] hkwln@lemmy.ml 2 points 1 week ago (1 children)

My point was that it's not EDK2 instead of GRUB at the same layer: EDK2 is the UEFI layer, and GRUB still runs fine on top of it as an EFI binary from your ESP. All the things you listed keep working that way: LUKS, RAID, password protection, even memtest via the efi/ insert mechanism. What you lose is only having GRUB directly in CBFS without an ESP.

What you gain with EDK2: Windows boots at all, TPM 2.0 works (the SeaBIOS issues that got it disabled are gone), and option ROMs for external GPUs.

[–] ExtremeUnicorn@feddit.org 2 points 1 week ago (1 children)

Hmm.

Having EDK2 in flash defeats the purpose of having a customized secure GRUB config, because you can just escape EDK2 to boot whatever you want.

Do you happen to know if EDK2 can be configured to only load a specific executable and prevent or password protect external boot sources?

Loading Windows.. sigh. What target group that is interested in custom BIOS firmware seriously wants to ever boot Windows? I guess there are very few legitimate usecases, but FreeDOS exists.

Loading OpROMs is a capability of coreboot, no need for SeaBIOS/vgabios or EDK2 just for that.

TPM2 support is also part of coreboot? Here I am unsure.

[–] hkwln@lemmy.ml 1 points 6 days ago

You can configure EDK2 very restrictive, But you then have to compile libreboot by yourself with these options.E.g Ignore extern media, you can configure keys in the flash so it only can boot your grub binary from ESP. With tinkering you can make edk2 + uki (using systemd-cryptroll with measured boot etc) more secure than grub.

As far as I know there is no real standard api for TPM2, it is part of coreboot, but EDK2 has a standardized UEFI interface.