Its actually funny that Gta6 came out before this.
this post was submitted on 17 Sep 2026
619 points (98.0% liked)
Open Source
49079 readers
321 users here now
All about open source! Feel free to ask questions, and share news, and interesting stuff!
Useful Links
- Open Source Initiative
- Free Software Foundation
- Electronic Frontier Foundation
- Software Freedom Conservancy
- It's FOSS
- Android FOSS Apps Megathread
Rules
- Posts must be relevant to the open source ideology
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
- !libre_culture@lemmy.ml
- !libre_software@lemmy.ml
- !libre_hardware@lemmy.ml
- !linux@lemmy.ml
- !technology@lemmy.ml
Community icon from opensource.org, but we are not affiliated with them.
founded 7 years ago
MODERATORS
You know, vintage printers offer much the same.
I have an HP 4050DTN from a good quarter century ago that has no DRM of any kind, no tracking dots, no reporting home to the mothership, is eminently repairable, and can accept overstuffed toner cartridges that are advertised to do 20,000 sheets at 5% coverage.
And the toner claim largely bears out. Two degrees later and I’m only on my third cartridge in the machine’s entire life. Last I ran a duty report the sheet count was getting close to 50k. Low 40s, at the very least. So it’s tracking decently close.
Sure, it now needs some parts refreshed. Rollers, fuser, and so forth. After a quarter century of use I would be surprised if something wasn’t starting to go. But parts are still readily available and surprisingly cheap. I mean, I have the parts in, I just haven’t had the time yet to swap them in.
The only downside of kit this old is that networking was an afterthought. Most units will come with USB, DIN-8, serial, and parallel ports, but finding a good JetDirect Ethernet network card - ideally 635n or newer - is difficult and expensive (the 615n bricked itself with distressing regularity, avoid at all costs).
I also have an HP 5000DTN that is of the identical build quality and can do oversized sheets up to 11×17. Beautiful machine in its early-2000s brutalist beigeness.
So if you want HP at their peak of printer glory, long before enshittification set in, hop on over to Wikipedia and consider any LaserJet model first released before 2006-2012.
To fix the networking you could get a dedicated USB print server or a RasPi with CUPS and attach the printer via USB. Probably cheaper than a vintage printer network card.
Yes but JetDirect is still cheaper and better integrated. There is the issue with outdated certificates and max. TLS 1.2 with the print server, but in a home/SOHO environment this should not be a critical security shortfall.
Thanks a lot ! I learned so much things. Thanks for the precise references.
It is a solution but i am not sure the supply will last. It can only dwindle.
Your arguments are sounds and valids. I have another solution to a problem, thanks again !
Get an extra roller kit and fuser kit, and you should be golden for the next two decades. The cartridges aren’t going away any time soon.
Never will i go back to ink cartigage or refillable ink... Those wear off faster than speed of light.
I switched 2 month ago and it's day and night...
Not Open Source hardware or firmware.
License is CC-NC-SA, which fails all formal definitions of Open Source.
Also why are they using a content license for software and hardware? We need to create an online course that teaches people how not to suck at doing foss... and then license that course with a eula, cause that would be so fucking funny.
I disagree. Open source can mean many things, this license permits you to do anything with it, just not selling it.
Only thing is, you have to use the same license when publishing changes, which is normal for almost all open source.
I dont See anything wrong with it and calling it non open source is a bit misleading i think
No they're right, cc-nc-sa is not open source or freedom respecting.
Edit: I'll elaborate. The core principles of the free software movement will follow. All other definitions not only do not conflict with this basic definition, but often expand on it with additional rights expectations. The Four Freedoms:
-
The freedom to run the program as you wish, for any purpose (freedom 0).
-
The freedom to study how the program works, and change it so it does your computing as you wish (freedom 1).
-
Access to the source code is a precondition for this.
-
The freedom to redistribute copies so you can help others (freedom 2).
-
The freedom to distribute copies of your modified versions to others (freedom 3). By doing this you can give the whole community a chance to benefit from your changes. Access to the source code is a precondition for this.
Restrictions on commercial use are a suppression on freedoms 2 and 3, and notably (at least as far as I'm aware), none of the licenses to come out of the FSF have commercial restrictions.
And in the Open-Source definition, it's literally in rule 1:
1. Free Redistribution
The license shall not restrict any party from selling or giving away the software as a component of an aggregate software distribution containing programs from several different sources. The license shall not require a royalty or other fee for such sale.
The hardware is pretty trivial. The cartridges, which are the most problematic part are HP. This is so underwhelming.
All I want is one laid-off and bitter engineer to get drunk one night and say “fuck this” and open source solve everyone’s problems with the abusable HP shit.
I don’t even care if it’s dot matrix all over again.
Problem is that those cartridge nozzles that deposit tiny droplets of ink precisely when and where you want them are pretty close to magic.
They're about as easy to manufacture as microchips, and they're also the one part of the inkjet printer that you absolutely need to be on point if you want it to print right.
I'm surprised we don't have open source laser printers though, that's still hard but should be doable, if you can source the material for the rollers and figure out the led strip that charges it?
I’m wondering if you could do a tiny valved pneumatic nozzle the sprays ink that way instead
it's still a good start . Also aftermarket cartridges exists.
oh, and also they offer refill kits.
HP carts have the printhead included, disposable, so quality will degrade fast with refilling. Epson/brother and some Canon have permanent printheads which will last orders of magnitude longer. If the cart/printhead is still going to be propietary, epson/brother printheads, which are readily available, and which can be setup pretty easily in a CISS configuration would have been way better. The project is really bad. The fact that they use paper rolls is also dumb. Are you really going to cut every single sheet? Rolls make sense for large format printing. Epson/brother with aftermarket CISS are the way to go, especially because you can get actual Epson ink in bottles for refilling, the ones used in their ecotank line, super cheap.
it also takes normal sheet paper. but it has an integrated cutter so the rolls enable A4 or A3 (us letter or 11x17), or any other length, or continuous from the same source.
permanent printheads are not really any better from a longevity standpoint. they still do degrade and need replacement. more often than not, that replacement either doesn't exist, hasn't been manufactured since the printer was a new model, or is prohibitively expensive and/or only available from random third-parties.
the last ink tank + separate printhead setup that you could very easily get tanks and printheads for was some old canon printers from 25+ years ago. the printheads were in a removable caddy, and that caddy was sold in stores with and alongside ink tanks.
printheads also need to be used, regularly. once you go a few weeks without printing, every day that you don't increases your chance those printheads will never print again. when the printhead is in the consumable, it gets replaced far easier and automatically on a cartridge swap. yes, that is at the expense of higher cost new consumables.
we've had to bin three brothers, two hp, an epson, and a canon over the twenty years because of bad and unreplaceable printheads. coincidentally we're currently using two salvaged hp printers that use the same cartridges as this 'open' printer, use refilled consumables, and the printers are old enough they don't scream and refuse to print if the color is empty--we can use and print black only.
the problem here with this project is they don't have their own printheads and cartridges, which means some of their code was either lifted from hp printers or reverse engineered; and they rely on hp as the only source for new consumables and printheads. hp would be very hostile to this project, so i hope they fully documented their entire process of development and are ready for the inevitable lawsuit.
Now do a laser printer
Slight open-washing involved though - the license is CC-By-NC-SA, which sadly makes it incompatible with open hardware projects, and restricted from being available as a pre-assembled kit.
Well you are right ! Still i see it as a massive positive win in this particular sector, but sure, lets see what happen and be greedy with licensing! May the next one/release/update be more open.
I thank you a lot
They do have a survey that includes the kit question.
Here is the link if you are interested: https://docs.google.com/forms/d/e/1FAIpQLSc0MLIj1Mfv81vaiOIQG1yMEilruRfNgx7h36l5a0qC-G9TZw/viewform
From this update : https://www.crowdsupply.com/open-tools/openprinter/updates/on-the-road-to-launch
creative commons doesn't even recommend their licenses be used for software (it's in their faq). i'm guessing the same would apply to hardware designs as well.
Creative Commons does not have any guidelines about using their licenses for hardware. It would still be a better idea to use CERN-OHL for hardware though.
load more comments
(1 replies)
Fuck NC.
In the linked survey they're talking about selling an ink kit. With that, the non-commerical license meaning nobody but them can sell spares, and them filing a patent, it's almost like they're just trying to start another printer company and just using the open source community to do advertising 🫠
I think you're misinterpreting - the thing needs ink one way or another, and the kit suggested in the image is just a standard ink refill kit. They're just asking if people want them to provide that, or if they want to get it elsewhere - I selected elsewhere.
What it means though is that nobody in the community can sell upgrades to the printer, sell spare parts, or, and by far most importantly, nobody can develop a fully open source printhead for this printer to sell.
Right now they are using a proprietary print head from a normal printer (understandably because it is by far the most complex engineering piece and is very complicated). However, an external team that wants to make an open hardware project taking on that engineering challenge with more expertise than this team will not be able to be compensated for their work if they make it specifically for this open source printer. According to my understanding of the license.
load more comments
(1 replies)
HP 63 et HP 63 XL (US)
HP 302 et HP 302 XL (Europe)
HP 803 et HP 803 XL (Asie)
And the ink they use is cheap/available internationally.
I also think that one can refill these with regular ink bottles from amazon/aliexpress
load more comments
(3 replies)
LETS GOOOOOO I have a small print shop and I only use Linux and it SUCKS
No more frustrating blockages like: "Cannot print in black because the yellow is empty."
I think they're trying to seduce me
Doesn't that happen because of legal requirements? https://en.wikipedia.org/wiki/Printer_tracking_dots
load more comments
(2 replies)
load more comments
(1 replies)
Curious how 3D beat 2D by, what, 10 years?
Ease really. Once the patents expired it was fairly simply to make a 3d printer, which is essentially a hot nozzle squirting plastic. It’s more akin to a pen plotter
An inkjet printer is significantly more complex. Even if you know how it works you essentially need a semiconductor level fab to make the printhead. That’s why all these projects just reverse engineer hp cartridges. Literally every inkjet printer patent could’ve expired 10 years ago and it wouldn’t change the engineering and manufacturing challenges
3D is actually 100% open source.
This still uses proprietary cartridges.
The perfect color for a printer doesnt exi...
spoiler
view more: next ›