Ideally no paint as buying an entire bucket if white paint for a white print seems wasteful.
Is there any sort of filler I could use to hide the seams between the parts I have glued together?
fiberglass?
this post was submitted on 26 May 2026
9 points (90.9% liked)
3DPrinting
22715 readers
160 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 3 years ago
MODERATORS
You need some kind of filler if you want seams to disappear, like bondo. The filler will be ugly though so you're going to need paint for sure.
Clever design can make seams less visible but the joints are always going to be there to some degree.
Or just live with the seams lol.
Fixing your warping/shrinking will make them less visible too.
Buy a 3d printer pen. Believe it or not they are pretty great at filling the spaces as long as the spaces are not too complicated or wide.
I came here to say this. Mine was, I think, name brand and it was only $35 and I've already used it to fix a few broken and flawed prints. Heat the filament up a little extra and you can squish it in place with the proper implememt without much if any trouble.
I used a mixture of baking soda+super glue which you can apply using a small spatula. This would require sanding afterwards of course and ideally painting, but it worked for me.
Print using a scarf joint so the seams have an overlap. Also that would get them up off the build plate where your warping problem is.
White silicone caulk would probably work well. Silicone wont get flaky or degrade over time.
Can you remove material from the left side of the joint? That would close the gap on the right.
Sugru would be pretty good at filling the gap