otter

joined 2 years ago
[–] otter@lemmy.ca 3 points 6 days ago* (last edited 6 days ago)

I think it's a mix of the two. There are legitimate reasons, and commercial reasons

Synology does not manufacture its own hard drives but instead certifies and rebrands drives from Toshiba and Seagate, leaving out only Western Digital among the world's largest manufacturers.

[–] otter@lemmy.ca 12 points 6 days ago (2 children)

They're disabling features

Synology, maker of network-attached storage (NAS) devices, will seemingly remove advanced features from its Plus devices that are not using hard drives provided by, or certified by, Synology itself, starting with its 2025 lineup.

What you might lose from using non-Synology-approved hard drives could include pool creation and support for any issues. De-duplication, lifespan analysis, and automatic HDD firmware updates could also disappear on non-approved drives, Synology's press release suggests.

 

Synology's telegraphed moves toward a contained ecosystem and seemingly vertical integration are certain to rankle some of its biggest fans, who likely enjoy doing their own system building, shopping, and assembly for the perfect amount of storage. "Pro-sumers," homelab enthusiasts, and those with just a lot of stuff to store at home, or in a small business, previously had a good reason to buy one Synology device every so many years, then stick into them whatever drives they happened to have or acquired at their desired prices. Synology's stated needs for efficient support of drive arrays may be more defensible at the enterprise level, but as it gets closer to the home level, it suggests a different kind of optimization.

[–] otter@lemmy.ca 11 points 1 week ago

While it's still somewhat of a blackbox, some definitions of "open source AI" are better than others

https://opensource.org/ai

The OSI one is decent

[–] otter@lemmy.ca 2 points 1 week ago* (last edited 1 week ago) (1 children)

The user you are talking to is on lemmy.ca, which is a Canadian instance.

You are talking to another Canadian

 

cross-posted from: https://aussie.zone/post/19146681

Jellyfin Server 10.10.7

Important Notes

Configurations behind a reverse proxy that did not explicitly configure trusted proxies will not work after this release. This was never a supported configuration, so please ensure you correct your configuration before upgrading. See the updated docs here for more information.

Security

  • Fix validation of API parameters to FFmpeg [GHSA-2c3c-r7gp-q32m], by @Shadowghost
  • Fix trusting forward headers if none are configured [GHSA-qcmf-gmhm-rfv9], by @JPVenson

Note: GHSAs will be published seven (7) days after this release.

General Changes

  • Fix regression where "Search for missing metadata" not handling cast having multiple roles [PR #13720], by @Lampan-git
  • Clone fallback audio tags instead of use ATL.Track.set [PR #13694], by @gnattu
  • Backport 10.11 API enum changes [PR #13835], by @nielsvanvelzen
  • Support more rating formats [PR #13639], by @IDisposable
  • Fix stackoverflow in MediaSourceCount [PR #12907], by @JPVenson
  • Upgrade LrcParser to 2025.228.1 [PR #13659], by @congerh
  • Include Role and SortOrder in MergePeople to fix "Search for missing metadata" [PR #13618], by @Lampan-git
  • Delete children from cache on parent delete [PR #13601], by @Bond-009
  • Fix overwrite of PremierDate with a year-only value [PR #13598], by @IDisposable
  • Wait for ffmpeg to exit on Windows before we try deleting the concat file [PR #13593], by @Bond-009
  • Fix 4K filtering when grouping movies into collections [PR #13594], by @theguymadmax
  • Remove empty ParentIndexNumber workaround [PR #13611], by @Shadowghost
  • Update dependency z440.atl.core to 6.20.0 [PR #13845], by @Shadowghost

Jellyfin Web 10.10.7

General Changes

  • Fix parsing minor version of Tizen [PR #6661], by @dmitrylyzo
  • Fix re-focusing on pause button when displaying OSD [PR #6510], by @dmitrylyzo
  • Fix skip button not displaying correctly with OSD [PR #6583], by @rlauuzo
  • Fix catalog plugin page not setting page title [PR #6570], by @nielsvanvelzen
[–] otter@lemmy.ca 3 points 2 weeks ago

The community !tech@programming.dev could also use some love

[–] otter@lemmy.ca 12 points 3 weeks ago

You can just paste the link normally. If you want custom text on the link, you do this

[Custom text](https://example.com/)

Renders this

Custom text

Also I think the post is talking about hiding the data to begin with. There are already some tracking tools out there that look at the existing data. If the data isn't accessible to you, then it's not accessible to the AI either. Nothing for anyone to look at

Although I'm not familiar with flight details to know what exactly is being hidden, or if there are workarounds

[–] otter@lemmy.ca 16 points 1 month ago* (last edited 1 month ago) (2 children)

Some brainstorming from me:

  • Ideally people do not buy more teslas
  • An initial goal would be to use the vehicle without it phoning home. Would the TeslaMate project be sufficient for that?
  • Long term, would it be possible to replace the software running on the car's console? Or would it be better to tear out the console and replace it with something else?

Alternatively, what would a recycling/conversion program look like?

 

I saw this article earlier:

Tesla 'going bankrupt' is endpoint of protests, says local organizer

In the spirit of right to repair, self-hosting, giving a second life to old devices, and limiting data collection by car companies:

  • What are some considerations?
  • Are there any projects worth keeping an eye on?

An example that came to mind was Valetudo, which is a cloud replacement for vacuum robots enabling local-only operation. Some robot vacuums are easy to install this on, and others require more invasive modifications.

What I've found so far:

  • FreedomEV, a project that was presented at FOSSDEM 2019 but doesn't have recent activity
  • TeslaMate, which is a popular and active selfhosted data logger for Teslas, but not necessarily a replacement for the software
[–] otter@lemmy.ca 32 points 1 month ago (1 children)

Gmail's search and filters have been annoying for some time now. This feels like an overpowered bandaid to that problem

[–] otter@lemmy.ca 2 points 1 month ago

I should have specified, people we're downvoting you

But looks like the score is positive again 🙂

[–] otter@lemmy.ca 32 points 1 month ago* (last edited 1 month ago) (5 children)

I've heard Kobo is better than the other big players when it comes to interoperability with open formats / self hosted setups.

As for the servers

The main one

https://github.com/janeczku/calibre-web

A popular newer one

https://github.com/crocodilestick/Calibre-Web-Automated

Also (to everyone else reading your comment) let's not downvote good faith comments, especially when they're phrased as a question and wanting to learn more

[–] otter@lemmy.ca 4 points 1 month ago* (last edited 1 month ago) (1 children)

Oh interesting, I didn't know that was a thing

Quoting from: https://www.reddit.com/r/synology/comments/1bapfkl

The armv8 architecture which the DS218 uses is supported by Container Manager, Synology just put a hardcoded config into the official package to exclude certain models from installing it:

exclude_model="synology_rtd1296_ds118 synology_rtd1296_ds218 synology_rtd1296_ds218play synology_rtd1296_ds418 synology_rtd1296_ds418j synology_armada37xx_ds119j synology_rtd1296_rs819"

Pretty sure the https://github.com/007revad/ContainerManager_for_all_armv8 linked above just removes the hardcoded exclusion and doesn't need to change anything else to get it to work.

If that workaround looks shady, you might be better off just installing docker directly

[–] otter@lemmy.ca 5 points 1 month ago* (last edited 1 month ago) (3 children)

Which Synology NAS is it, and can you install Container Manager on it? That might be the simplest option since your files are already on that device. There should be lots of guides out there for it.

Container Manager is basically a worse DockGE / Portainer by Synology. It should be sufficient for pasting in the Jellyfin docker compose, but if you wanted you could also spin up DockGE/Portainer first and do it through that interface (or SSH into the NAS and do it all with the command line)

So the setup would be

  • run Jellyfin as a Docker container on the Synology NAS (using either Container Manager or DockGE/Portainer/straight up command line)
  • try it out with the web browser/desktop app/mobile apps to see if you like it
  • find a setup that you find convenient for the TV (ex. Android TV apps with some device, the desktop app on the PC, etc)

EDIT: Looks like there are official guides for it, as well as lots of videos on YouTube: https://jellyfin.org/docs/general/installation/synology/

I gather Plex is at least semi-commercial while Jellyfin is the open source but worse option.

I haven't used Plex enough to judge, but from the comments I've seen it seems that Jellyfin is now on par with or better than Plex. There was also some news recently about Plex moving more core features (remote playback?) to the paid plans, so I imagine there will be more people moving over soon.

There are a lot of options for client side apps, official and unofficial, so you might be able to find something specific to your setup

 

I commented this in another thread, but thought that it could do with its own post.

It's a solid list to go off of if you want to pick a few to host. The link has more info on each, as well as which ones are non-profit / for-profit

Overview

Have some space computing power and want to donate it to a good cause? How about 10+ good causes at once?

♻️ put an under-utilized system to good use
🚲 use as much or as little CPU/RAM/DISK as you want
✨ 100% more soul warming than mining
📈 geek out over your CPU/disk/bandwidth stats on the leaderboards

This is a collection of containers that all contribute to public-good projects:

  • networks: Tor, i2p
  • computing: boinc, foldingathome
  • archiving: archivewarrior, zimfarm, kiwix, archivebox, pywb
  • storage: ipfs, storj, sia, transmission

This v1 list was started by the ArchiveBox project, but it's open to contributions.

 

I didn't copy in the updates this time because there are so many, and I can't tell what's important since I haven't tried this one out yet. See the link above for the changes :)


More info for those that aren't familiar

Calibre, while a fantastic tool for its age, has several problems when containerised, including its reliance on a KasmVNC server instance for the UI, which is near impossible to use on mobile and is relatively resource-heavy if you're running a small, lower power server like I am.

For many, Calibre-Web has really swooped in to save the day, offering an alternative to a containerised Calibre instance that's resource-light and with a much more modern UI to boot.

However, when compared to full-fat Calibre, it unfortunately lacks a few core features leading many to run both services in parallel, each serving to fill in where the other lacks, resulting in an often clunky, imperfect solution.

Goal of the Project 🎯 Calibre-Web Automated aims to be an all-in-one solution, combining the modern lightweight web UI from Calibre-Web with the robust, versatile feature set of Calibre, with a slew of extra features and automations thrown in on top.

2
submitted 3 months ago* (last edited 3 months ago) by otter@lemmy.ca to c/technology@lemmy.world
 

cross-posted from: https://lemmy.ca/post/37011397

!opensource@programming.dev

The popular open-source VLC video player was demonstrated on the floor of CES 2025 with automatic AI subtitling and translation, generated locally and offline in real time. Parent organization VideoLAN shared a video on Tuesday in which president Jean-Baptiste Kempf shows off the new feature, which uses open-source AI models to generate subtitles for videos in several languages. 

1
submitted 4 months ago* (last edited 4 months ago) by otter@lemmy.ca to c/technology@lemmy.world
 

It's a weird headline, but the discussion is around how journalists and the public look through internet history in cases like this. Some of it is helpful, some of it is not.

In particular, it's a response to this article:

'Extremely ironic': Suspect in UnitedHealthcare CEO slaying played video game killer, friend recalls (NBCNews)

The game in this case being AmongUs...

Monday night, NBC News published an article with the headline “’Extremely Ironic’: Suspect in UnitedHealthcare CEO Slaying Played Video Game Killer, Friend Recalls.” This article is currently all over every single one of my social media feeds, because it is emblematic of the type of research I described above. It is a very bad article whose main reason for existing is the fact that it contains a morsel of “new” “information,” except the “information” in this case is that Luigi Mangione played the video game Among Us at some point in college.

cross-posted from: https://rss.ponder.cat/post/72744

1
submitted 4 months ago* (last edited 4 months ago) by otter@lemmy.ca to c/selfhosted@lemmy.world
 

Welcome to release v1.122.0 of Immich. After a long release break, Immich is back and brings many new features with loads of bug fixes to enhance the user experience further and make Immich more delightful to use. Some of the highlights below:

  • HDR video support in the mobile app
  • Multiple URLs for machine learning service
  • Automatic switching between server URLs in the mobile app
  • Ability to hide users when searching in an Immich instance
  • Access the most recent albums through the web navigation bar
  • Custom email templates
  • Automatically clean up files left behind by interrupted uploads
  • More responsive hosted maps for users in Oceania
  • Notable fix: swiping between videos failing on older Android devices
 

Description from github:

A C++ based, lightweight music and noise remover for YouTube and other internet media, using DeepFilterNet for audio enhancement.

Demo Video & Info

Direct link to demo video

Source post: https://www.reddit.com/r/selfhosted/comments/1h7k7fa/

I am introducing you Fast Music Remover (https://github.com/omeryusufyagci/fast-music-remover); a free and open source tool that filters internet media.

We consume, willingly or not, large amounts of media everyday, and that includes content that is emposed on us. I want to give you the choice to opt-out of them without missing out on the core content.

We're building a feature rich media processor that is efficient, modular and cross platform. It's being built for you! This means: clean and light APIs for programmers, containerized on GHCR for remote users, with a Web UI for anyone interested!

Today, we support background music filtering and noise removal to enhance audio quality. In the near future, we are looking at supporting multiple ML models as well as DSP modules to empower you with the tools you need to take control over the media you consume.

There is a demo video on the readme as well as clear instructions on how to use FMR. You can immediately start by getting the docker image available at: https://github.com/omeryusufyagci/fast-music-remover/pkgs/container/fast-music-remover

If you have any feedback at all, please let me know. Thank you!

view more: next ›