this post was submitted on 24 Sep 2026
124 points (99.2% liked)

3DPrinting

23807 readers
248 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 3 years ago
MODERATORS
 

Eneloops would only last about 3 weeks. And disposable last 2 months. This door is used a lot and since it has Zwave and a door open sensor it sends info on every open.

Bonus, since it can handle the lipo AA batteries that put out 1.8v and it gives the motor more oomph I made the battery pack give 7.2v and it never sticks anymore.

This is a garage-door so its not critical access but is used a lot.

you are viewing a single comment's thread
view the rest of the comments
[–] everett@lemmy.ml 4 points 4 hours ago (1 children)

30+% failure rate every recharge cycle

What is considered a "failure" in this context?

[–] NekoKoneko@lemmy.world 1 points 2 hours ago (1 children)

The battery no longer recharges and is effectively trash.

[–] everett@lemmy.ml 1 points 1 hour ago

That's just terrible to hear. My oldest Eneloops are going on a decade with no failures, but I also had fairly good luck when I used to buy cheaper rechargeables. The common thing might be only using slow chargers.

Nobody else has brought this up, but I've read that counterfeit Eneloops are a thing.