I won a bambu as a gift because I had a chinese printer that never worked and wanted something easy and "dumb friendly" no more days amd days looking up a problem. Well mine came with a problem and after 12 HOURS i still wasn't able to load a filament. Reading about bambu support I realized I was going to spend a REALLY long time and they wouldn't fix it so I just returned for a full refund. I'm very frustrated and almost giving up 3d printing all together because it's the second defective printer I get.
Edit: Hey guys just want to give some context. I have been printing for more than 6 years, and I have resin and filament printers. My first filament printer was a Biqu B1 and it came with a defective board (support agrees). I had to replace pieces from the get go and it does't have a correct temp reading (It only prints PLA at 260⁰ and it's not 260⁰ but it doesn't show a correct consistent temp reading) and also doesn't pause. Sometimes it will just stop and restart in the midle of a print. All that work and time traumatized me when it comes to fdm printing. I do a lot of resin tho. My brother saw people saying how great bambu was and gave me one because of it. I'm not a begginer, I did contact support with videos of the problem and they said it did look like an issue (the machine sensors don't recognize the filament and keeps giving "fillament is over" everytime)
Anyway, after all that I didn't want to go through support all over again with a brand new machine, and I was pretty frustrated because of my bad luck, so I just ranted here.
Thank you for the ones with kind and helpful words, I did end up buying a Crealty in another store. Lets try again, third time is the charm
If you can't load a filament after 12 hours, I'm going to say that's user error.
I did contact support and after sending videos they did agreed it was a machine problem. I just didn't want to have to deal with fixing machine problems Instead of printing problems. Before "saying" just ask why. You don't even know why I could load and assumed I was dumb. I do have another fillament printer and 2 resin printer and have this as a hobby for years. Not every problem is user error
You came here ranting with very basic info and no context to what the issue was, what steps you took to fix it, or even with a question of how to fix whatever the issue is. So yeah, like many here I assumed you're either inexperienced or lack the knowledge on how to ask for help.
If you'd like help, ask for help. There's tons of knowledgeable here who've likely seen the same or similar issues. Otherwise we're commenting on your extremely limited info that you waited almost a full day to update.
Agreed, I've had to strip my toolhead down due to my own impatience with a clog and it takes like 15 minutes at most. PTFE to filament sensor to hot-end is the entire filament path so what took 12 hours of work without even leaving this user with an idea of what the issue was?
I feel a bit of this is happening here: XKCD: "Average Familiarity". Most people who aren't very familiar with the ins and outs will likely look at what you'd said and not instinctively be able to follow along. If your hobby is printing, its fair to say you know a lot, but if your printing is just a means to supplement another hobby, you might not have doven deep enough into research to know all of it.
Having to troubleshoot a system you're unfamiliar with and new to is complicated. The diagnosis step can feel monumental when you don't know how every component functions in relation to what else. Pair that with a cheap entry-level printer, and it's what made my first experiences with 3D printing reeealy drawn out to the point I'd given up multiple times. When OP says they spent 12 hours working on it, I gotta say, I really believe it.